Acid proof & chemical proof

We have manufactured & Export a complete range of Acid Proof Bricks, Acid Proof Tiles & Acid Proof Cement - Mortars, Epoxy Floor Coating, Mandana Stone Flooring, and mastic compounds since 1969.

Modern Polymer Industries has been established in the year 1986 by its well-versed and experienced late Shri Kantibhai P. Patel (B. Sc. with Chemistry as a principal subject from Gujarat University in the year 1959). The Managing Partner and founder person late Shri Kantibhai acquired experience and expertise in manufacturing Corrosion Resistant Mortars by working with reputed & pioneer manufacturer M/S Netson Manufacturing Co. (P) Ltd., Ahmedabad. After leaving Netson, he also established our contract division M/s. Indochem Engineering Co. In the year 1982. Our organization has acquired a high reputation for quality products & growth through his managerial capacity, proper guidance, and principle within a short.

We Serve all kinds of Industrial Plants with our Expertise in the field of Corrosion Technology Manufacturing of a complete range of Acid Alkali Proof: Tiles, Bricks, Cement, Resins base Mortars, Carbon / Graphite Tiles, and allied Products.

Our Products:-

• Positector 200 Series
• Chemical Resistant Bitumor Primer
• Chemical Resistant Bitumor Mastic
• Furomor Corrosion Proof Furan Resin Mortar
• Phenomor Corrosion Proof Phenolic Resin Mortar
• Silimor Corrosion Proof Sodium Silicate Mortar
• Sulphomor Corrosion Proof Mortar
• Cashewmor Corrosion Proof CNSL Resin Mortar
  
  

Sodium Silimor™ Mortar. (Acid Resistant Mortar)

Sodium Silicate Mortar is widely used for Acid Resistant Bricks & Tiles lining works as Bedding & Jointing Mortar for Tanks, Floor, Drain, Foundation

Resistant: Sodium Silicate mortars are useful in PH range of 0-6 except where sulphuric acid exporter exists in the vapor phase wet-dry exposures or in a concentration above 93% It is also resistant to Oxidizing & Non-oxidizing Acids, & except Hydrofluoric Acid & Water Sodium Silicate Mortar

Sulphomor™ Sulphur Mortar

Hot melt-type acid-proof cement opposes oxidizing and non-oxidizing chemicals up to certain limits. Best jointing cement for acid proof Brick /
Tile lining work in battery charging rooms & electroplating plants. It resists Temperatures up to 90 °C. The melt mortar is tremendously fluid and pours quite easily.

Sulphur Cement is used in Industries mainly jointing of Acid Proof Brick / Tiles in the lining of Pickling Tanks, Storage tanks, Sumps, Drainage lines, and Floor and Sewerage line pipe joints.Acid Proof Materials, Acid Proof Materials Manufacturer, Acid Proof Materials India, Manufacturer, Supplier Exporter India.

Preparation of Mortar:

Sulphur ingots are broken and placed in a suitable clean, dry Kettle. It is melted over low heat by stirring with a metal rod or ladle. If sulphur is agitated or ignited a tight cover or wet gunny bags shall be kept ready for use in case of fire. Sulphur mortar burns with a low blue flame. In such a case heating should be stopped and the vessel should be enclosed with the lid or wet gunny bags until the fire is extinguished.

If the mortar thickens on overheating, it should be allowed to cool and stir until thin. Care shall be taken that water or damp Mortar does not fall or mixed in the heating vessel so as to avoid foaming.

Mechanical/Physical property:

Density of cured mortar  :  2.10grm/cc to 2.20grm/cc

Bond Strength:  10 Kg./Cm2

Compressive Strength:  280 Kg/Cm2

Flexural Strength:  70 Kg/Cm2

Water Absorption:  1%
  
Storage Life

12 Months at the temperature of 270C (+20C)

Packing 

• Ingot - 50 Kg. Bag
• Powder - 50 kg. Bag.   

Acid Proof Materials Exporter, Acid Proof Chemical Exporter, Potassium Silimor Mortar, Furomor Furan Resin Mortar, Sodium Silimor Mortar India.